more | Aztek/Testors Nozzle - 0.3mm Fineline (9304C)
Aztec's patented system provides an easy to clean and change nozzle containing the main needle and needle spring. Suitable for Aztec A320, A430, A470, 1000S, 2000S, 3000S
Application: Fine Detail, Dots, Very Fine Mists
Medium: Lacquers, Inks, Water Colours, Metalizer Paint | |
more | Aztek/Testors Medium Coverage .70mm Orange Nozzle for Aztech (9343C)
Aztec's patented system provides an easy to clean and change nozzle containing the main needle and needle spring. Suitable for Aztec A320, A430, A470, 1000S, 2000S, 3000S
Application: Medium Area Coverage
Medium: Lacquers, Thinned Solvent Based Enamels, Airbrush Colours, Spraying Acrylics,Fabric Colours | |
stock
info | Expo Clippit Clip-On Soldering Iron Holder (77761)
A clip on soldering iron holder, ideal for bench edge mouting and for holding an iron safely when in use in awkward locations. | |
stock
info | Expo Large Electronic Digital Caliper 12in/300mm (74034)
One of the indispensible measuring tools for model building, the digital caliper takes all the guess out of measuring. An accurate measurement can be taken of any part, slot or hole, with fine adjustment by thumbwheel to ensure you have the jaws tight against the edges. The measurement is displayed digitally from a user-setable reference datum. Just read off the exact measurement instead of struggling to count the marks on your rule to the nearest millimeter! | |
more | Antex 240v Soldering Iron with Adjustable Temperature 50w (max) "Model TCS" (TCS)
This 240 volt Iron comes fitted with a mains plug, and has an adjustable power rating up to 50watt (Max)and a working tip tempreature between 200 - 450 C. All this is adjustable with the built in temperature control within the handle.
Fitted with a 2.3mm (No.1100) chrome plated tip as standard.
Antex tips in varying sizes are available from us. Suitable replacements for the "Model TCS" iron are No. 1100/1101/1102/1103/1105/1106/1107/1108 & 1109. | |
more | Expo 20pc HSS Drill Set Titanium Coated 0.3mm - 1.6mm (11533)
| |
more | Expo Electronic Digital Caliper 6in/150mm (74031)
One of the indispensible measuring tools for model building, the digital caliper takes all the guess out of measuring. An accurate measurement can be taken of any part, slot or hole, with fine adjustment by thumbwheel to ensure you have the jaws tight against the edges. The measurement is displayed digitally from a user-setable reference datum. Just read off the exact measurement instead of struggling to count the marks on your rule to the nearest millimeter! | |
more | Expo 5pc Diamond Warding File Set (72514)
5-piece diamond warding file set with cushion grip handles. Set contains flat, half round, round, 3-sided and square files. Files are 180mm long, maximum widths vary from 5mm to 10mm. | |
more | Expo 3 Jaw Pin Chuck (12806)
3 jaw pin chuck supplied with tommy bar, designed to hold drills from 05.mm to 8.3mm.
Shaft diameter 6.5mm, chuck width 18mm
overall length 64mm. | |
more | Expo Razor Saw Set (73544)
Razor saw set contains one No.5 handle, suitable for use with razor saws or knife blades, one 239 1¼in (31mm) deep razor saw and one 234 ¾in (19mm) deep razor saw. Both saws are 5in long with 54 teeth per inch.
Suitable for cutting most materials including metals, plastics and wood. | |
more | Expo Headband Magnifying Glass with 3 Lenses (73840)
Headband magnifier with three separate lenses, allowing you to switch magnification strengths quickly. Combinations of the lenses allow magnification up to 4.8x to be obtained. The velcro adjustable headband fits all sizes. | |
more | Expo 10pc Mini Diamond Needle File Set (72506)
Set of 10 mianture diamond needle files in storage wallet. Each file measures approx. 100mm length, 2mm-3.5mm maximum widths. Set contains round, flat, hand, square, 3-square, half-round, knife, crossing, oval and crossing taper files. | |
more | Weller Soldering Iron 40w (77610)
| |
more | Expo A3 Cutting Mat 450 x 300mm (71203)
These self-healing cutting mats protect your table surfaces and make cutting of materials easier. The large A2 and A3 mats are ideal for use as fixed top surfaces on dedicated modelling workbenches. A3 mat measures 450mm x 300mm. | |
more | Expo 20pc HSS Drill Bit Set 0.3mm - 1.6mm (11520)
| |
more | Antex ST6 Soldering Iron Stand (ST6)
Suitable for all Standard Antex soldering irons. Includes slip resistant feet, or can be screwed down for permanent fixing. | |
more | Shesto Rotacraft Mini Variable Speed Tool Kit (RC12VS)
12v mini rotary tool kit, ideal for hobby, electronics, repairs, restoration & smaller DIY tasks. Variable speed 12vlt tool with plug in transformer, 0-18,000 rpm for a wider range of applications, 3 grip positions - palm, pistol, and pencil , comprehensive range of tools also included | |
Tools and Hardware
Search
Index
Checkout
Back